|
|
|
|
Allen Concrete Equipment News |
| |
| The Allen MP 215 is a total re-design of the MP 205 Mechanical Drive Riding Trowel. The MP 215 is an entry level riding trowel with features that are found in our larger riders. For tight spots and smaller jobs, there’s no better riding trowel than the MP215. |
|
|
| The Allen MP 235 Edger is a total re-design of the MP 225 Edging Mechanical Drive Riding Trowel. The MP 235 Edger is so unique that it’s patented. This unique riding trowel has rotating guard rings which allows the operator to run along edges of walls, and around columns and pipes to achieve a hard troweled clean finish every time. This exclusive Allen Rider allows the operator to edge within 5/16” of the edge of a wall, eliminating the need to hand finish those areas. |
|
|
Allen Engineering Corporation, a world leader in concrete finishing & paving equipment, recognized their 2010 High Performance Dealers during the recent World of Concrete in Las Vegas. Allen’s 2010 High Performance Dealers are as follows: |
|
|
| The Allen MP 315 is a total re-design of the MP 305 Mechanical Drive Riding Trowel. The MP 315 is an entry level riding trowel with the features found in our larger riders. The higher horsepower gasoline engine and heavy-duty drive train is packed in an easy-to-service frame. |
|
|
| The Allen MSP 445 is a totally new Mechanical Drive Riding Trowel in the Allen riding trowel line-up. The higher horsepower, new improved torque-converter clutch and improved weight to horsepower ratio allows you to pan through the toughest pours, the MSP 445 is a concrete finisher’s dream. |
|
|
April 20, 2010 @ 08:04am CDT, by Scott Ward
Allen Engineering Corporation (AEC) is pleased to announce the expansion of their wet screed equipment line with the introduction of the all new E-Screed by Magic Screed. The E-Screed is a precision engineered, lightweight wet screed for single operator strike-off of concrete powered by a battery. Fast and easy to use, this high-frequency screed produces uniform vibration distribution over the entire blade length enhancing structural integrity of the concrete through consolidation. |
|
|
December 11, 2009 @ 08:50am CST, by Scott Ward
The E-Series Walk-Behind Power Trowel offers an economical, low-weight alternative to Allen’s current Pro Series Walk-Behind Power Trowels. Available in both 36” and 30” sizes. |
|
|
December 11, 2009 @ 08:33am CST, by Scott Ward
Allen is pleased to announce the expansion of their Allen Concrete Pavers line with the introduction of the All New Model 4836B Bridge Deck Finisher (BDF). This bridge deck finisher features all hydraulic controls powering the mainframe and the dual-roller finishing carriage making it more user friendly than previous models. The 4836B BDF incorporates durability, functionality and quality that contractors look for in their equipment. |
|
|
March 03, 2009 @ 02:27pm CST, by CSK
The improved MSP 460 finishing rider responds better, looks better, and is more comfortable for the rider.
|
|
|
March 03, 2009 @ 02:23pm CST, by CSK
The All New, Allen MSP 415 riding trowel is powerful enough for tough panning and fast enough for final finishing of concrete. The MSP 415 Rider is powerful, responsive, dependable, and value priced. With the use of the 35hp Vanguard Air-Cooled Engine and a centrifugal clutch, the MSP 415 delivers power through its Super Heavy Duty (SHD) gear boxes to two 46” diameter non-overlapping rotors. This new rider is just what today’s concrete contractors ordered. The MSP 415 is the latest addition to Allen’s Mechanical Super Pro Series of Riders.
|
|
|
March 03, 2009 @ 02:16pm CST, by CSK
The Allen HDX 740 is a totally new All Hydraulic-Powered Riding Trowel. Packed with the punch of a 60HP Cummins Turbo Diesel, the HDX 740 is one of the most powerful and dependable riders on the market today. The low weight to horsepower ratio and reliable hydraulic components (including a patent pending automatic load sensing device) ensures a peak “on the concrete” performance every time. The HDX 740 is the second in the new series of Hydra-Drive Extreme (HDX) Allen® Riders.
|
|
|
March 03, 2009 @ 01:42pm CST, by CSK
Allen Engineering is pleased to introduce an innovative system for producing level concrete floors (as measured by FL Numbers) when using hand held floater screeds. The Screed Rail: a Laser Guided Form System is a versatile system that can be used with any make of floater screed for quick and easy wet screeding of large elevated pours where high FL (levelness) Numbers are demanded. The Screed Rail System comes with a set of two rails with floats and laser level adjustable ends (Laser beacon/receiver and portable screed not included).
|
|
|
|
|
|
|
|
