|
|
|
|
| |
HAND TOOLS
Checked to exact flatness tolerances, our extruded magnesium Allen Hand Tools are specifically designed to improve floor or pavement levelness. Each tool comes standard with three 6' (1.8 m) snap-together aluminum handles. Our hand tools are available with either the Rock-It or Equalizer pitch adjusting head for precise, even control.
Bump Cutter
Cuts down bumps and fills low areas after concrete slab has been floated.
Check Rod
Reduces bumps and fills low areas while the concrete is still plastic.
Channel Float
Use in liew of traditional bull float for flatter floors and pavements.
Rock-It Pitch Adjusting Head
|
Equalizer Adjusting Head
|
| MODEL | TOOL WIDTHS | CHANNEL/BEAM DIM. |
| Channel Float |
5-12 ft. (1.5-3.7 m) |
6 in. (152 mm) |
| Check Rod |
8-16 ft. (2.4-4.9 m) |
2x4 in. (51x102 mm) |
| Bump Cutter |
8-16 ft. (2.4-4.9 m) |
2x4 in. (51x102 mm) |
| Saw Beam |
14-20 ft. (4.5-6.1 m) |
2x4 in. (51x102 mm) |
|
Models shown with Equalizer Pitch Adjusting head.
Saw Beam
Use to achieve Fmin100+ Super-Flat Floors.
|
|
|
|
|
|
|
