WALK-BEHIND TROWELS // PRO436E

Perfect for troweling along the edges of walls or around extrusions, the Pro436 Edger features all the power and performance of our Pro Series with the patented advantage that allows it to outperform other edging walkers. Guard rings rotate, allowing for a ride along the edge. Finishing up to 5/16” with 90° lip float pans or ¾” with blades.

Specifications

ENGINE
HONDA GX270 / 270 cc
HORSEPOWER CLASS
9 hp / 6.7 kW
FUEL TYPE
Gasoline
ROTOR DIAMETER
36 in (4-blades) / 91 cm
MAXIMUM ROTOR SPEED
120 rpm
TROWEL ARMS & SPIDER
Standard Duty
WEIGHT
198 lb / 90 kg
DIMENSIONS (L X W X H)
84 x 36 x 38 in / 213.4 x 91.5 x 96.5 cm

Warning: Cancer and Reproductive Harm - https://www.p65warnings.ca.gov/

PRO436E
Fine pitch control handle
 
 
 
Safety switch
 
 
 
Carry bar
 
 
 
Lifting hook
 
 
 
Fingertip throttle control
 
 
 

Equipment Videos

Walk Behind Trowels
06:04 Min

This video gives instructions on how to properly complete the alignment of a trowel arm jig on a walk-behind or ride-on trowel.

Walk Behind Trowels
02:49 Min

This video gives you instructions on how to properly check the flatness of your trowel arms for walk-behind and ride-on trowels.

FAQ's

My Walk-Behind Trowel positive pitch drifts down

Check the ¾” adjusting nut on the positive pitch clutch.

Walk-Behind Trowel is shredding belts

1. Make sure you have the correct belt.

2. Check belt alignment.

How do I keep my pitch handle from falling while operating the machine?

Make sure the set screws in the collar bushing are catching the intentions on the shaft.

What do I do if my machine is spinning at idle?

1. Check belt alignment.

2. Check engine idle.

Why is my walk-behind wobbling?

Look for a bent arm or trowel arm out of alignment.